CONTROL SB2210 | COMPACT, LOW PROFILE, HIGH-POWER SUBWOOFER WITH 2 X 250MM (10 INCH) WOVEN-FIBERGLASS CONE DRIVERS
CONTROL SB2210
COMPACT, LOW PROFILE, HIGH-POWER SUBWOOFER WITH 2 X 250MM (10 INCH) WOVEN-FIBERGLASS CONE DRIVERS
CONTROL SB2210
COMPACT, LOW PROFILE, HIGH-POWER SUBWOOFER WITH 2 X 250MM (10 INCH) WOVEN-FIBERGLASS CONE DRIVERS
- UM : EA
- Estimated Weight: 58.0
The Control SB2210 is a compact subwoofer equipped with two 10-inch drivers. It is designed to deliver low-frequency audio reinforcement for various sound system configurations. The enclosure is constructed to support outdoor installation environments.
- 2 x 250 mm (10 in.) Woven Fiberglass Cone LF Drivers
- 500 W Power handling
- Frequency Response Down to 38 Hz
- 13 x M6 Insert Points for Optional U-Bracket
- Compact Low Profile Design
Frequency Range | 38 Hz - 500 Hz |
---|---|
Frequency Response | 48 Hz - 95 Hz |
Power Rating | 500W continuous, 2000W peak pink noise (2 hrs), 1000W continuous program (2 hrs), 400W continuous pink noise (100 hrs) |
Maximum Input Voltage | 60 VRMS (2 hrs), 120 V peak |
Sensitivity | 95 dB, 1W @ 1m in half-space (50 – 90 Hz average) |
Maximum SPL (1m) | 122 dB in half-space |
Impedance | 8 ohm |
Minimum Impedance | 7.2 ohm at 160 Hz |
Recommended Filter | 45 Hz, 24 dB/oct high-pass filter |
Drivers | Two 250 mm diameter LF drivers, long-excursion design, woven fiberglass cone, butyl rubber surround, linear suspension spider, high-temp anodized aluminum voice coil former, high-temp voice coil wire and adhesive, FEA optimized motor construction, aluminum conductive ring |
Enclosure | High Impact PolyStyrene with 10% glass fill, 8 mm polyurethane co-mold, UV-resistant paint on white model |
Baffle | Thermoset composite coated steel, zinc-plated, 3-layer foam backing |
Outdoor Capability | IP-45 rating per IEC529 with MTC-PC2 terminal panel cover, exceeds MilSpec 810 for humidity, salt spray, temperature & UV, passes Mil-Std-202F for salt spray |
Input Connectors | Screw-down terminal strip, zinc plated copper, nickel-plated screws/washers; accepts up to 9 mm outside, 4 mm inside open lug (#6, #8, #10) or bare wire (up to 12 AWG/2.5mm2); MTC-PC2 and MTC-PC3 covers for weather protection |
Safety Agency | ROHS-compliant; optional MTC-SBT300 transformer is UL recognized per UL1876 |
Colors | Black |
Included Accessories | 1 MTC-PC2 input panel cover, 4 floor standing feet, 4 beveled washers |
Mounting Hardware | Optional U-bracket, insert points on top & bottom |
Coverage Angle | Omnidirectional |
Customers Also Bought

MTC-SBT300
300W MULTI-TAP 70V/100V TRANSFORMER FOR SB2210 / TAP SETTING 300W, 150W, 75W AT 70V/100V
MAP: $125.00 / EA
Customers Also Viewed

CONTROL SB2210-WH
COMPACT, LOW PROFILE, HIGH-POWER SUBWOOFER WITH 2 X 250MM (10 INCH) WOVEN-FIBERGLASS CONE DRIVERS.
MAP: $890.00 / EA

