KD-X444SP | HDBASET 4K/18G POH/HDMI EXTENDERS (INCLUDES KIT TX/RX 4K/40METERS 1080P/70METERS)
KD-X444SP
HDBASET 4K/18G POH/HDMI EXTENDERS (INCLUDES KIT TX/RX 4K/40METERS 1080P/70METERS)
KD-X444SP
HDBASET 4K/18G POH/HDMI EXTENDERS (INCLUDES KIT TX/RX 4K/40METERS 1080P/70METERS)
- UM : EA
- Estimated Weight: 3.0
KD-X444SP is a 4K/UHD 18Gbps, HDCP2.2 compliant HDMI over CAT5e/6 Transmitter plus Receiver set for extension of digital video signals with the latest standards in resolution, HDR, and Chroma over a single CAT cable. In addition to HDMI AV, KD-X444SP carries IR or RS-232 for controlling remotely located equipment. An IR sensor and IR emitter are included, and the Tx unit’s IR Input port supports Serial IR input directly from a control system / IR block. With Power over CAT (PoC), only one power supply is needed, and it may be connected at either unit for ease of installation. KD-X444SP features Key Digital’s proprietary Full Buffer Technology software suite, with EDID handshake management, fixed hot plug detection, HDCP authentication to the connected source, and TMDS signal re-clocking for installation with long cabling or many connectivity layers.
Features
- Single CAT5e/6 UTP/STP Extension: Fully automatic equalization, and amplification depending on cabling length
- 4K Resolution Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Flexible Power over CAT (PoC): Only one power connection needed. Tx may power Rx, or Rx may power Tx
- Low Profile: Super slim chassis design
- Signal Extension: 4K/UHD (18G), 4K 10G up to 164ft / 50m. 1080p and lower up to 230ft / 70m
- IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
- Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
- RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
- Surround Audio Support: Up to Dolby®, DTS™ (formats up to 5.1/6.1)
Additional Features
- HDR10 (High Dynamic Range): More life-like images through a greater range of luminance
- HDCP 2.2: Compliancy up to HDCP 2.x and backward compliant
- Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding 10.2Gbps to accommodate transmission channel\
- 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension.
- Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit -Full Buffer Technology: Key Digital’s proprietary suite of EDID, HDCP, TMDS, and HPD management to overcome Pro AV installation obstacles.
- EDID Management: Internal library with 14 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from CAT5e/6 or HDMI pass-thru outputs
- HDCP Authentication: HDCP sources are authenticated by the HDCP key on transmit unit, for one-to-one topology
- Hot Plug Detection Control: Enables integrator to choose if the active signal voltage is forced to the connected display/output device
- TMDS Re-Clocking: Re-generation of TMDS (AV signal) channel data at Transmit unit for brand-new AV signal

